All Sun EM155A 50MHz 200MSa/S 3-in-1 Professional Portable Digital Oscilloscope
Specification:
| Performance of Scope | |
| B Bandwidth (-3dB) | 50MHz |
| Sampling Rate | Max. real time sampling rate 200MSa/s |
| Channel | 1 |
|
Coupling |
AC, DC |
| Rise Time | ≤ 7.6ns |
| Input Impedance | 1MΩ, ≤ 20pF |
| Max Input Voltage | 1x CAT III 300 VAC 10x, 100x CAT III 600 VAC |
| Vertical Resolution | 8 bit |
| Vertical Sensitivity | 10mV/div – 5V/div |
| Horizontal Resolution | 2ns/div |
| Horizontal Sensitivity | 2ns – 5s |
| Record Length | 4K/channel |
| Memory | 6 memory locations |
| Trigger Mode | Auto, Normal, Single |
| Trigger Type | Edge trigger |
| Basic Performance | |
| Screen | 320×240 pixels (RGB), with LED backlight |
| Communication | USB, PC software |
| Battery | 3.7V lithium polymer battery, 4Ah |
| Operating Environment | Temperature: 0℃ – 40℃ |
| Humidity: ≤ 75% | |
| Storage Environment | Temperature: -10℃ – 50℃ |
| Humidity: ≤ 85% | |
| Operating Altitude | 0 – 2000m |
| Size | 218mm × 118mm × 50mm ( including holster ) |
| Weight | 700g(main body only) |
| Performance of multimeter | |
| Display | 6000 counts |
| Input | Max. Input Voltage: 600 Vrms CAT II, 300 Vrms CAT III |
| Continuity Test | Beeps at < 25Ω, in 600Ω range |
| Diode Test | If the voltage drop of the diode under test is more than 2V or if the test circuit is open, the display will show ” OL “. If the voltage drop is less than 0.25V, the built-in buzzer will sound. |
| Capacitance Measurement | 6.000nF – 6mF |
| Resistance Measurement | 600.0Ω – 60.00MΩ |
| Voltage Measurement | 6.000V – 600V |
| Waveform output performance | |
| Amplitude | Output amplitude is adjustable.
Output amplitude range: 0 – 2.5V Output amplitude accuracy: ± 2% for amplitudes < 2V ± 5% for amplitudes > 2V |
| Frequency | There is no frequency setup for dc output.
Output frequency range: 26Hz – 50kHz Output frequency accuracy: ± 2% |
| Specification of Scope | |
| Vertical System: channel of Scope | |
| Bandwidth (-3dB) | 50MHz |
| Accuracy | 10mV/div to 20 mV/div: ± 5% full scale |
| 50mV/div to 5V/div: ± 3% full scale | |
| Vertical Offset Accuracy (DC) | ±0.2 div ±2mV ±0.5% offset value |
| Trigger Sensitivity | DC to 50 MHz: 0.8 div |
| Horizontal System: time base of Scope | |
| Horizontal Sensitivity | 2ns/div – 5s/div, in 1-2-5 step |
| Horizontal Accuracy | < ( 0.01% + 1 pixel ) |
| Specification of probe | |
| Rise Time | X1 < 23.3ns |
| X10 < 7.6ns | |
| Bandwidth | X1 DC – 8MHz |
| X10 DC – 50MHz | |
| Input Impedance | X10 10MΩ (not including the Scope’s input resistance 1MΩ) |
| Input Capacitance | X1 46pF ( not including the Scope’s input capacitance ) |
| X10 about 15pF | |
| Specification of Multimeter | |||
| Function | Range | Frequency, test current, or load
voltage |
Condition: at calibration temperature±5℃, for 1
year |
| Voltage | |||
| DC Voltage | 6.000V | 1.0 + 8 | |
| 60.00V | 0.5 + 8 | ||
| 600.0V | 0.5 + 8 | ||
| AC Voltage | 6.000V – 600.0V | 40Hz – 400Hz | 1.0 + 10 |
| 400Hz – 2kHz | 5.0 + 10 | ||
| Resistance | |||
|
600.0Ω |
1.0 + 5 | ||
| 6.000kΩ | 1.0 + 5 | ||
| 60.00kΩ | 1.0 + 5 | ||
| 600.0kΩ | 1.0 + 5 | ||
| 6.000MΩ | 1.0 + 5 | ||
| 60.00MΩ | 2.0 + 10 | ||
| Capacitance | |||
| 6.000nF | 3.0 + 8 | ||
| 60.00nF | 3.0 + 8 | ||
| 600.0nF | 3.0 + 8 | ||
| 6.000μF | 3.0 + 8 | ||
| 60.00μF | 3.0 + 8 | ||
| 600.0μF | 3.0 + 8 | ||
| 6.000mF | 3.0 + 8 | ||
| Continuity | Buzzer beeps if the resistance is less then about 25Ω. | ||
| Diode | Buzzer beeps if the forward voltage drop of the diode is < 0.25V. | ||
Need this service or product? Contact us at 0800 000 488, and we'll be happy to help! We offer a wide range of electrical and electronics diagnostic and repair services, so please don't hesitate to contact us regarding any unrelated issues!
